RESUMO
The application of frontal polymerization to additive manufacturing has advantages in energy consumption and speed of printing. Additionally, with frontal polymerization, it is possible to print free-standing structures that require no supports. A resin was developed using a mixture of epoxies and vinyl ether with an iodonium salt and peroxide initiating system that frontally polymerizes through radical-induced cationic frontal polymerization. The formulation, which was optimized for reactivity, physical properties, and rheology, allowed the printing of free-standing structures. Increasing ratios of vinyl ether and reactive cycloaliphatic epoxide were found to increase the front velocity. Addition of carbon nanofibers increased the front velocity more than the addition of milled carbon fibers. The resin filled with carbon nanofibers and fumed silica exhibited shear-thinning behavior and was suitable for extrusion-based printing at a weight fraction of 4 wt %. A desktop 3D printer was modified to control resin extrusion and deposition with a digital syringe dispenser. Flexural properties of molded and 3D-printed specimens showed that specimens printed in the transverse direction exhibited the lowest strength, likely due to the presence of voids, adhesion issues between filaments, and preferential carbon nanofiber alignment along the filaments. Finally, free-standing printing of single, angled filaments and helical geometries was successfully demonstrated by coordinating ultraviolet-based reaction initiation, low air pressure for resin extrusion, and printing speed to match front velocity.
RESUMO
Time-resolved second harmonic generation (SHG) spectroscopy is used to investigate acetaminophen (APAP)-induced changes in the adsorption and transport properties of malachite green isothiocyanate (MGITC) dye to the surface of unilamellar 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes in an aqueous colloidal suspension. The adsorption of MGITC to DOPC liposome nanoparticles in water is driven by electrostatic and dipole-dipole interactions between the positively charged MGITC molecules and the zwitterionic phospholipid membranes. The SHG intensity increases as the added MGITC dye concentration is increased, reaching a maximum as the MGITC adsorbate at the DOPC bilayer interface approaches a saturation value. The experimental adsorption isotherms are fit using the modified Langmuir model to obtain the adsorption free energies, adsorption equilibrium constants, and the adsorbate site densities to the DOPC liposomes both with and without APAP. The addition of APAP is shown to increase MGITC adsorption to the liposome interface, resulting in a larger adsorption equilibrium constant and a higher adsorption site density. The MGITC transport times are also measured, showing that APAP decreases the transport rate across the DOPC liposome bilayer, especially at higher MGITC concentrations. Studying molecular interactions at the colloidal liposome interface using SHG spectroscopy provides a detailed foundation for developing potential liposome-based drug-delivery systems.
